Info

The pressed grating, type 'PAL', is an aluminum grating especially suitable for light loads, ceilings and facades. Up to a load-bearing bar height of 50 mm, this grating is edged with a specially developed T-profile as standard, which has a positive effect on the squareness.

Because this covers the welded joints, it is a very nice grille to look at.

Above a height of 50 mm and on request, O.G. Toast the grid of a flat edge.

-bearing bar thickness 2 or 3 mm.

-steel S235JRG 2 (Rst 37-2) galvanized according to NEN-EN-ISO 1461

Bearing bar (height and thickness in mm.)

20/2, 25/2, 30/2, 35/2, 40/2, 50/2, 60/2,

20/3, 25/3, 30/3, 35/3, 40/3, 50/3, 60/3

Fill bar (height and thickness in mm.)

10/2

Mesh sizes (in mm.)

Distance bearing bars center to center
11.1 and 16.6 and multiples thereof.
Intermediate distances are possible.

Mesh 11.1 only possible at 2 mm. bearing bar.

>Distance filler bars center to center 
11,1 en 16,6 and multiples of this.

Any combination is possible with gratings with a bearing bar length of up to 1,750 mm.

For gratings with longer bearing bars, see the mesh sizes under type PHD.

-Omranding

O.G. Press gratings are manufactured with a T-profile or flat steel frame. Special edging also can be used, such as shovel edge made of flat steel, angle steel or tube profile.

-Sink

O.G. Press gratings are galvanized in accordance with NEN-EN-ISO 1461.

-Coating

OG Press gratings can be provided with powder coating.

Anti-slip versions

Type PA - Carrying and filling bar Anti-slip

Type PAD - Anti-Slip Bearing Bar

Type PAV - Filler Rod Anti-slip

More info or ordering requests?

info@ogroosters.nl

call: +31 (0)10 437 22 88